RULE LOPRO BILGE PUMP AUTO LP900S

Availability: In stock (2)

• The Rule LoPro™ LP900S Automatic Bilge Pump is a low profile pump with 900 gallons per hour capacity
• Designed for tight spaces, the height of the pump is only 2-1/4"
• It features a threaded discharge nozzle to which you can attach either the included straight or 90° fitting
  • Multiple ports are available for this pump
  • All ports are included
    • 3/4" Straight
    • 3/4" Right angle
    • 1" and 1-1/8"
• It also includes a tricuspid check valve for the straight fitting which can be used to minimize the back flow of water
• The entire discharge body swivels up to 180° for ease of installation
• The hose can also swivel 360° for better routing
• The LoPro™ LP900S has (2) Automated settings, enabling the pump to turn on when the water reaches either 2" or 1.3"
  • High or Low Water Sensing Mode:
    • The pump starts when water reaches a 2" level
    • By turning the motor cartridge upside down, the sensor is set at 1.3"
  • Electronic Automatic Mode:
    • The pump automatically turns on every 2.5 minutes to check for water, and if it's detected the pump stays on until the water is gone

Specifications:

• Voltage: 12 Volt DC
• Flow: 900 GPH open flow at 13.6 Volts
• Amp Draw: 4 Amp approx
• Protection: TCO
• Port Configuration: 3/4", 1", 1-1/8" Straight, 90 degree 3/4"
  • Backflow preventer valve can be used with straight fittings
• Dimension:
  • Height: 2.3"
  • Length: 9.3"
  • Width: 2.3"