| Availability: |
Out of stock |
FREE SHIPPING!
(Enter "free shipping" in the discount code during check out)
Raymarine® i60 Wind System
Features:
- Full-featured analog / digital wind display for cruising and racing sailboats
- Functions include:
- Apparent wind speed and direction
- Velocity made good (VMG)
- Beaufort
- Max. wind speed
- True wind speed and direction (requires SeaTalk speed through water data)
- Tack
- Alarms for high / low wind angle, low true wind speed and max. true wind speed
- Designed to complement Raymarine's new generation multifunction displays
- Large numerals and digits, red backlighting for outstanding visibility in all lighting conditions
- Excellent viewing angles and large push-button controls for ease of use at sea
- SeaTalk, SeaTalkng and NMEA 2000-compatible interfaces
- Built-in transducer interface
- Low power consumption for longer battery life
- Multiple data source support eliminates potential data conflicts
- Front-mounted design for simple installation
- Same footprint as the older Raymarine ST60+ instrumentation
- Supplied with waterproof gasket for flush mounting
- 2-Year limited warranty (upgradable to 3 years upon product registration within 90 days of purchase)
- In the box:
- i60 Wind Display (E70061)
- Short-arm (14.5") forward wind transducer (E22078) with 100 ft. cable
- Clip-on front bezel, black (R70368)
- Clip-on front bezel, gunmetal (R22168)
- SeaTalkng blanking plug (A06032)
- 1'3" SeaTalkng spur cable (A06038)
- SeaTalk to SeaTalkng converter cable (A22164)
- Sun Cover (R22169)
Specifications:
- Raymarine System Model No. E70150
- Display: Analog wind direction dial with digital wind speed display, red backlighting
- Nominal Voltage: 12 Volt DC
- Operating Voltage: 10 - 16 Volt DC
- Power Consumption (typical): Less than 1 W (display only) / 2.4 W max. with transducer connected
- Current Consumption: 45 to 65 mA (display only) / 200 mA max. with transducer connected
- Water Protection: IPX6 (protected against high-pressure water stream from any angle)
- Connections: 2 x SeaTalkng and transducers / compatible with marine industry CAN systems
- Dimensions: 4.3" W x 4.52" H
- Cut-out for i60 Wind Display: 3.63" dia.
- Optional compatible Raymarine Transducer (sold separately):
- Long-arm (26") forward wind transducer (E22079) with 100 ft. cable
