C$2,899.00 C$2,599.95
Availability: Out of stock

(Enter "free shipping" in the discount code during check out)


Raymarine Evolution EV-200 Sail Autopilot Pack Includes:

  • EV-1 Sensor Core (E70096)
  • P70 Control Head (E22166)
  • ACU-200 Actuator Control Unit (E70099)
  • Evolution Cable Kit (R70160)
  • Rotary Rudder Reference Transducer (M81105)


  • General Features
    • Evolution autopilots eliminate the need for complicated setup and calibration – once Evolution is installed, getting started is as easy as switching on the autopilot
    • Thanks to the intelligent EV sensor core, autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments
    • Suitable for mechanically steered mid-size sailboats with max. displacement of 24,000 lbs
    • Requires Type 1 Mechanical Linear Drive (not included)*
  • EV-1 Sensor Core
    • Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
    • Mounted above or below decks, rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing / submersion standards
    • 9-Axis sensor monitors vessel motion in (3) dimensions
    • Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
    • Simple SeaTalk ng connectivity to control head and ACU
    • Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions
    • Auto-compensation for onboard magnetic fields and reliable heading accuracy in northern and southern extremes
    • Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays
  • P70 Control Head
    • Push-button operation control unit designed primarily for sailboats
    • New LightHouse user interface is easy to learn and use
    • Start-up wizard helps you configure the pilot quickly and easily
    • Wide 160° horizontal and vertical viewing angles
    • Advanced LED backlighting offers low power consumption, and delivers vibrant color and contrast
    • Anti-reflective coating for improved visibility in bright sunlight
    • Simple system and group dimming / illumination
    • Supported autopilot modes include Auto, Standby, Pattern, Track, Wind Vane, Power Steer and Jog Steer
    • Support for multiple data sources
    • SeaTalk ng / NMEA 2000 and SeaTalk 1 connectivity (no bridging required)
  • ACU-200 Actuator Control Unit
    • Delivers reliable autopilot drive power and provides power to the SeaTalk ng bus
    • Supports Type 1 Raymarine hydraulic, linear and rotary mechanical drives
    • Provides powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor
  • Evolution Cable Kit includes:
    • (1) SeaTalk ng power cable (0.4m)
    • (1) SeaTalk ng backbone cable (5m)
    • (1) SeaTalk ng spur cable (0.4m)
    • (1) SeaTalk ng 5-way connector block
    • (2) SeaTalk ng T-piece connector
    • (2) SeaTalk ng terminator


  • Raymarine Part No. T70155
  • EV-1 Sensor Core (E70096)
    • Nominal Supply Voltage: 12 Volt DC
    • Operating Voltage Range: 10.8 - 15.6 Volt DC
    • Power Consumption: 30 mA
    • Sensors:
      • 3-Axis digital accelerometer
      • 3-Axis digital compass
      • 3-Axis gyro digital angular rate sensor
    • Data Connections: SeaTalk ng
    • Waterproof Rating: IPX6
    • Dimensions: 5.5" W x 5" H x 5" D
  • P70 Control Head (E22166)
    • Nominal Supply Voltage: 12 Volt DC
    • Operating Voltage Range: 9 - 16 Volt DC
    • Power Consumption: 69 mA (no lighting) / 134 mA (100% illumination)
    • Data Connections: SeaTalk ng (2) and SeaTalk 1 Compatible
    • Display Size: 3.5" TFT LCD / 320 x 240 pixels
    • Waterproof Rating: IPX6
    • Dimensions: 4.33" W x 4.52" H
    • Flush Mount Cutout: 3.54" dia.
  • ACU-200 Actuator Control Unit (E70099)
    • Drive Current Output: Max. continuous 15 Amp
    • Drive Clutch Output: Up to 2.0 Amp continuous, selectable between 12 / 24 Volt DC
    • Nominal Supply Voltage: 12 or 24 Volt DC
    • Operating Voltage Range: 10.8 - 31.2 Volt DC
    • Power Consumption (standby) - Main Power Supply: 300 mA @ 12 / 24 Volt DC
    • Power Consumption (standby) - SeaTalk ng : 20 mA @ 12 Volt DC
    • Data Connections: SeaTalk ng
    • Connections: Rudder reference sensor, sleep switch, power, drive motor, drive clutch, ground
    • Waterproof Rating(s): Drip resistant
    • Dimensions: 11.2" W x 8.3" H x 2.5" D
0 stars based on 0 reviews