| Availability: |
Out of stock |
Raymarine Evolution EV-200 Hydraulic Autopilot Pack Includes:
- EV-1 Sensor Core (E70096)
- P70R Control Head (E22167)
- ACU-200 Actuator Control Unit (E70099)
- Type 1 Hydraulic Reversing Pump 12 VDC (M81120)
- Evolution Cable Kit (R70160)
- Rotary Rudder Reference Transducer ( M81105)
Features:
- General Features
- Evolution autopilots eliminate the need for complicated set up and calibration – once Evolution is installed, getting started is as easy as switching on the autopilot
- Thanks to the intelligent EV sensor core, autopilot automatically evolves and adapts to your vessel's steering characteristics without any user adjustments
- Suitable for mid-size powerboats with hydraulic steering ram capacity 4.9 in 3 - 14 in 3
- Includes Type 1 Hydraulic Reversing Pump Drive
- EV-1 Sensor Core
- Combines advanced solid-state sensors with the Evolution autopilot processor in a single easy-to-install housing
- Mounted above or below decks, rugged enclosure is fully sealed and built to IPX6 and IPX7 waterproofing / submersion standards
- 9-Axis sensor monitors vessel motion in (3) dimensions
- Precision monitoring of heading, pitch, roll, and yaw allows the autopilot to evolve instantly as sea conditions and vessel dynamics change
- Simple SeaTalk ng connectivity to control head and ACU
- Solid state sensor technology delivers dynamic accuracy to within 2° in all conditions
- Auto-compensation for onboard magnetic fields and reliable heading accuracy in northern and southern extremes
- Fast and reliable heading data for MARPA, radar overlay and heading modes on Raymarine multifunction displays
- P70R Control Head
- Combination of rotary dial and push-button controls designed for powerboats
- New LightHouse user interface is easy to learn and use
- Start-up wizard helps you configure the pilot quickly and easily
- Wide 160° horizontal and vertical viewing angles
- Advanced LED backlighting offers low power consumption, and delivers vibrant color and contrast
- Anti-reflective coating for improved visibility in bright sunlight
- Simple system and group dimming / illumination
- Supported autopilot modes include Auto, Standby, Pattern, Track, Wind Vane, Power Steer and Jog Steer
- Support for multiple data sources
- SeaTalk ng / NMEA 2000 and SeaTalk 1 connectivity (no bridging required)
- ACU-200 Actuator Control Unit
- Delivers reliable autopilot drive power and provides power to the SeaTalk ng bus
- Supports Type 1 Raymarine hydraulic, linear and rotary mechanical drives
- Provides powerful and secure interface between steering systems and the EV-1 course computer and 9-axis sensor
- Type 1 Hydraulic Reversing Pump 12 VDC
- Operates the boat's steering mechanism as part of a Raymarine autopilot system
- Primarily designed for use on boats with an existing hydraulic steering system
- Contains a precision gear pump and a check valve driven by a servo motor
- Evolution Cable Kit includes:
- (1) SeaTalk ng power cable (0.4m)
- (1) SeaTalk ng backbone cable (5m)
- (1) SeaTalk ng spur cable (0.4m)
- (1) SeaTalk ng 5-way connector block
- (2) SeaTalk ng T-piece connector
- 2 x SeaTalk ng terminator
Specifications:
- Raymarine Part No. T70157
- EV-1 Sensor Core (E70096)
- Nominal Supply Voltage: 12 Volt DC
- Operating Voltage Range: 10.8 - 15.6 Volt DC
- Power Consumption: 30 mA
- Sensors:
- 3-Axis digital accelerometer
- 3-Axis digital compass
- 3-Axis gyro digital angular rate sensor
- Data Connections: SeaTalk ng
- Waterproof Rating: IPX6
- Dimensions: 5.5" W x 5" H x 5" D
- P70R Control Head (E22167)
- Nominal Supply Voltage: 12 Volt DC
- Operating Voltage Range: 9 - 16 Volt DC
- Power Consumption: 69 mA (no lighting) / 134 mA (100% illumination)
- Data Connections: SeaTalk ng (2) and SeaTalk 1 Compatible
- Display Size: 3.5" TFT LCD / 320 x 240 pixels
- Waterproof Rating: IPX6
- Dimensions: 4.33" W x 4.52" H
- Flush Mount Cutout: 3.54" dia.
- ACU-200 Actuator Control Unit (E70099)
- Drive Current Output: Max. continuous 15 Amp
- Drive Clutch Output: Up to 2.0 Amp continuous, selectable between 12 / 24 Volt DC
- Nominal Supply Voltage: 12 or 24 Volt DC
- Operating Voltage Range: 10.8 - 31.2 Volt DC
- Power Consumption (standby) - Main Power Supply: 300 mA @ 12 / 24 Volt DC
- Power Consumption (standby) - SeaTalk ng : 20 mA @ 12 Volt DC
- Data Connections: SeaTalk ng
- Connections: Rudder reference sensor, sleep switch, power, drive motor, drive clutch, ground
- Waterproof Rating(s): Drip resistant
- Dimensions: 11.2" W x 8.3" H x 2.5" D
- Type 1 Hydraulic Reversing Pump (M81120)
- Ram Capacity: 4.9 in 3 - 14 in 3
- Max. Stall Pressure @ 12 Volt DC: 750 psi
- Peak Flow Rate: 67 in 3 / min
