||Out of stock
||Ships in 1 to 3 weeks
8 remote controller
The IC-M802 offers an industry-standard 4-inch tall
remote controller. When set up with the IC-M502 VHF
radio, Icom offers you a complete communications station.
Large LCD with dot matrix characters
You can easily read the alphanumeric name of any of the
1355 ITU channels at a glance with the large LCD dis-
play. Nighttime operation is no problem with 10 levels
adjustable backlit display and keypad.
Easy to use in all conditions
The IC-M802 offers two large dials
– bank and channel
for easy channel selection. Up to 16 banks of 20
each for user channels, and 17 banks for ITU
channels are available.
Built-in digital selective calling
For added safety at sea, the IC-M802 offers the
latest in one-touch DSC emergency communica-
(ITU Class E standard.)
gency button is covered by a red, spring loaded
hatch to avoid accidental DSC activation.
Digital signal processor
The speech compressor, utilizing DSP, increases
average talk power. Flexible filter settings provide
for narrow band signals like e-mail, SITOR, FSK
and other operation without an optional filter.
of powerful output
150 Watts of power offers superior worldwide
communications. A one piece, die cast alu-
minum chassis and a large cooling fan allow
continuous transmission at full output power –
very important for data communications, like e-mail.
One-touch e-mail access
An SSB first! The IC-M802 can be set to memorize your
HF e-mail access frequency, mode and bandwidth settings.
At sea e-mail has never been easier.
* Please consult with an HF e-mail provider for details.
Automatic antenna tuner, AT-140
An optional automatic antenna tuner, AT-140, easily con-
nects to the IC-M802. When the tuner cannot tune the an-
tenna, the IC-M802 bypasses the tuner and displays a
warning indicator on the LCD.
• Wide band receive coverage
(0.5 – 29.9999MHz)
• Remote control mic allows you to select channels directly
• Accessory RS-232C port allows connection of modem, etc.
• GPS input, NMEA 0183 version 3.01
• A headphone jack in front of the controller